RESIDENTIAL DRYWALL REPAIRS COLORADO SPRINGS
TECC Painting | 6650 Vincent Frontage Rd Colorado Springs CO 80918 | (719) 577-9300
DRYWALL REPAIR IN COLORADO SPRINGS
Although drywall is built to be robust, it is not immune to damage.
When you see damaged drywall, it is not advisable to leave it alone. It spoils your home’s aesthetic and subjects your interiors to impurities such as unwanted moisture and creepy crawlies. It may also affect the overall energy-saving performance of your property by allowing cold air from the air conditioners or heat from the heater to leak through damaged drywall.
The bigger the hole, the more demanding the repair process can become. It is recommended that you hire an expert at this point. Oversized holes could mean the wall needs to be replaced entirely, as the cost to repair the drywall would exceed the cost to replace it.
WHY DOES DRYWALL CRACK?
Cracks can form where drywall corner bead is inserted, often due to improper installation.
A corner bead is used in drywall finishing to support and reinforce corners and conceal the noticeable seam between two separate drywall boards, resulting in a smooth 90-degree angle. However, with their sensitivity to wear and tear, corner beads are often utilized on the outside corners, making them susceptible to cracking.
Outside corners are subjected to daily damage. You may gradually observe drywall mud and paint peeling off the corner bead, exposing the bare metal of the corner bead. And due to the needed cure period of the joint drywall compound, this process will only take a few days with a drywall repair contractor.
Vinyl corner bead, for example, maybe put with spray adhesive, but if the wrong type of adhesive is used, cracking may develop as the structure settles. Likewise, if staples are used to install vinyl corner beads incorrectly, cracking may also occur later.
Screws or nails are necessary when installing metal corner beads to provide the walls with the appropriate strength. If there are not enough fasteners or they are located too far out, cracking may occur during the settling process.
Drywall contractors in the Colorado Springs area have varied viewpoints on the most powerful method for installing corner beads. Some contractors believe that the paper-faced corner bead is the most durable and least prone to cracking.
When a stable corner is required to avoid future cracking, many contractors have discovered that a paper-faced corner bead put with an all-purpose drywall compound is the ideal solution.
Other reasons include one or both of the following:
USE OF THE WRONG DRYWALL MUD
The drywall may crack because the wrong type of drywall mud was used when taping the joints. Some drywall mud is more adhesive than others and should be used for taping drywall, while others should only be used for finishing. Likewise, several drywall mud solutions are only meant for the second or third application.
MIXING ALL-PURPOSE MUD WITH MESH TAPE
According to some drywall tapers, mesh tape should never be used in drywall taping since it is not as sturdy as paper tape. However, many drywall tapers agree that mesh tape works well with quick-setting drywall mud. In addition, mesh drywall tape works great if it is bedded in with hot mud. In short, using all-purpose drywall mud with mesh tape will only cause it to crack.
THE PROCESS OF MUDDING AND TAPING DRYWALL
Taping and mudding join drywall pieces together to form a single solid wall. Drywall tape and mud are applied to strengthen seams and conceal screws and nails.
The wall will be smooth and seamless when the taping and mudding process is performed correctly. It is a difficult task, but any skilled drywall contractor will have it handled.
The mudding procedure begins with applying fiberglass tape to all joints, followed by a layer of mud to bind them. The first layer is evenly spread with a thin mudding knife, leaving no noticeable excess mud. When the mud has dried, the drywall contractor will sand it smooth using the sheetrock surface. They will conceal any screws lightly, as a screw must never rip the top layer of sheetrock paper.
Applying mud to screw heads has the function of keeping the surface as even as possible. Then, a quality contractor like TECC Painting applies two more layers of mud to every joint and smooths out the surface even further. And finally, the surface will be primed and ready for painting.
COMMON DRYWALL TEXTURE TYPES
A quality drywall company does a wide range of drywall texture types like true craftsmen. If you are thinking about incorporating a new texture into your home after the drywall repair project, browse through this list and find the best one for your next home project needs!
SMOOTH DRYWALL FINISH
The classic, smooth drywall finish may appear basic, but in the hands of a professional drywall repair contractor Colorado Springs, it can be a work of art in and of itself. An utterly smooth drywall finish, also known as a Level 5 finish, entails putting a skim coat of drywall mud across the whole wall, resulting in a flawlessly level and beautiful surface. A near-mirror quality may provide a theatrical display inside a home or office.
LACE DRYWALL TEXTURE
Lace drywall texture is simply a spray knockdown that does not require sanding. As a result, the design is multi-layered and mimics an old-fashioned lace. This technique, often known as Spanish Lace, produces a texture comparable to stucco surfaces and is commonly seen in homes with stucco exteriors.
ORANGE PEEL DRYWALL TEXTURE
The surface of the orange peel texture is cracked and mildly wrinkled, resembling an orange. However, the surface features delicate curves that set it apart from other styles.
COMB DRYWALL TEXTURE
A toothed trowel is used to create a series of grooves in the wall or ceiling when applying a combed texture. The combing pattern, which is usually attributed in half fans, has a structured look while remaining reasonably simple to imitate in the case of repair work.
Like many drywall texture types, the application can be easy or complex. Whatever the case, this is an effective technique to add flair to any area or to conceal an unsightly ceiling
SPRAY SAND CEILING TEXTURE
The spray sand ceiling texture is just as it says. A hopper gun is used to spray sand combined with primer, water, or extremely thin mud onto the ceiling. When done correctly, it produces a textured surface that does not fracture and split like an orange peel texture. The spray sand technique is commonly used as a subtle accent on ceilings but may also be seen on walls.
STOMP BRUSH DRYWALL TEXTURE
The stomp brush technique is an older style that is a real treat. It includes dipping a big brush in a pail of drywall mud, pressing it against the ceiling, then abruptly pulling it back down to produce a unique, ridged pattern. Because the goal is to create a reproducible surface in case of repair, the application is relatively random.
It is not usual to see structured stomps positioned at fixed distances across the ceiling. Lastly, stomped walls are uncommon because the ridges are sharp and can readily snag the garments of pedestrians, knocking them flat.
CROW’S FEET DRYWALL TEXTURE
The texture of a crow’s foot is remarkably like that of a stomp brush. The difference is in the brush itself. Two oval stomp brushes put side by side form a crow’s foot. This is an excellent option if you want a slightly more organized ceiling texture or to texture a ceiling in half the number of stomps.
SKIP-TROWEL CEILING TEXTURE
The skip trowel method adds a touch of a bit of flair to a standard drywall texture. The installer applies a thin layer of drywall mud to the whole ceiling or wall, then goes over it with a clean trowel while still wet. The second pass pushes up portions of the mud bed, forming a raised layer in random, rounded areas. The texture’s depth is determined by how much mud is applied in the first coat.
ROSEBUD DRYWALL TEXTURE
The rosebud drywall texture is named for the likeness of a single tile to a flower, with the central bud and petals fanning out. This technique is the brush stomp technique but done evenly so that each stomp is visible and does not noticeably overlap the others.
KNOCKDOWN DRYWALL TEXTURE
Knockdown is a broad phrase for spraying, pounding, or brushing on drywall mud and then dragging a tool over the still-wet material to flatten it into a random pattern. Many variants are classified as knockdown, including skip trowel, orange peel, and lace patterns. The material you use, the angle of the trowel or knife, and the depth generated by the number of layers you build on are the subtle nuances between them, among other artistic variants.
BENEFITS OF HIRING TECC PAINTING DRYWALL REPAIR PROFESSIONALS
GET EXPERT ADVICE
There is no suitable alternative to experience, and with it comes the insight and knowledge needed to repair the drywall, regardless of how significant the damage is. A professional drywall repair company understands its job and the demands of its clients and therefore offers you a tailored solution.
Drywall restoration pros have seen it all and have witnessed every type of damage that drywall may face. As a result, they know what must be done to correct the drywall issue. Everything is in black and white before you, from estimates to the actual course of action, making it simple to decide whether to replace or repair your drywall.
EXPECT THE LATEST REPAIR EQUIPMENT
You are unlikely to have all the equipment necessary for drywall repair if you work in a different industry. However, if you hire drywall contractors, you can be confident that they will use the most up-to-date tools to fix your drywall. The best drywall contractors have the appropriate equipment, and they also know how and when to use it, leading to a better-performed drywall project.
When you want to fix the drywall yourself, you also take unnecessary risks and harm your health. On the other hand, professionals know how to avoid accidents. They also know how to handle the essential safeguards during the drywall repair.
SAVE YOUR TIME
Professionals can complete a job in a couple of hours; others with little or no expertise can do the same task in days. Therefore, it makes no sense to waste your valuable time; instead, it is preferable to store it and put it to greater use. Finding a great company to fix your drywall will therefore save you time.
BEST QUALITY WORKMANSHIP FOR COLORADO NATIVES
TECC Painting employs an outstanding job with drywall repair contractors trained to repair any existing drywall problem on your entire house, including drywall corner bead cracks, installing drywall, popcorn ceiling, and stucco repair. Repairing drywall inside corners will also not be a problem. So, when it comes to these types of home improvement projects, always seek professional service since nothing beats their years of high-quality service.
Keep your properties looking their best. Let us be your drywall repair contractor in Colorado Springs, CO!
Serving the Colorado Springs area and Castle Rock for 40 years, our company offers meticulous craftsmanship and a locally owned professional relationship worth keeping.
TECC Painting has completed countless impeccable drywall services for property owners and managers in the Colorado Springs area in the past few years. Previous clients who availed Colorado Springs drywall repair projects are performed by highly trained professionals, ensuring an excellent job!
TECC Painting is one of the best drywall repair contractors in Colorado Springs and the surrounding area. We perform quality work and charge at a reasonable price. In addition, we have verified reviews, thus guaranteeing customer satisfaction.
We use only the best products while prompting the simple premise of our industry’s best practices. We also take pleasure in offering superior drywall repair services, including free consultation.
Request a free estimate today!
drywall repair contractor springs, drywall installers colorado springs, drywall repair and installations colorado springs co, drywall repair colorado springs colorado springs, co, drywall repair companies colorado springs co, drywall repair companies in colorado springs co